Zigbee Device Control

Reads sensor values from, or controls, a Zigbee device registered in Settings. Every property the device exposes can be accessed: light brightness, switch on and off, temperature and humidity readings, and more. Devices are paired and registered in Settings > Zigbee Device (Part 6).

Zigbee Device

Select the device to communicate with.

Commands

• Read (default): Reads the device's sensor values into variables.
• Write: Sends values to the device to control it.

Property Mapping

The table lists the properties supported by the selected device. For Read, the values of the checked properties are stored in the assigned variables; for Write, values are sent to the checked properties. The list is generated from the device's Exposes information, so it varies by device model.